How to Replace the Battery in a 2012 Suzuki SX4 Key Fob
Keyless entry remote allow access to your Suzuki. When the key fob battery is dead you will not to be able close car remotely. It's not difficult to replace the battery in your key fob, and it’s easier than you think. All you need is described below.
What type battery remote key fob useBefore starting disassembly key fob check all that you need: 1 CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your SX4's remote key fob
A tiny button battery installed inside the your key fob. Remove any internal key before you try to pry apart the keyless entry remote.
Gently try to open your fob with flat head screwdriver. Replace CR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's shell. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you by mistake place battery wrong way.
Before assembling keyless entry fob's case, make sure that all working fine by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Gently try to assemble the pieces in place by hands from top to bottom. If your key body tightly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
Key Battery Suzuki Proximity keyfob HOW TO change
Still not working? Buy new one