2012 Volvo V70 Key Fob Battery Replacement Guide
If your car keyless entry remote is not working perfectly, the cell battery likely must to be replaced. In this case, you’ll benefit from knowing how to open your remote key fob and change a dead battery DIY. If you gonna solve to do it at home near V70, use this instruction, but first make sure you have all you need.
What type battery does 2012 Volvo V70 remote key fob required
Changing batteries in remote key fob require 2xCR2430 batteries and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 2xCR2430 batteries
Simple steps to replace the battery in your car's keyless entry remote
Inside of your key fob installed small button cell battery. Remove any internal key before you try to pry apart the key fob.
Carefully try to disassemble your key with hands or flat head screwdriver. Change 2xCR2430 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2430. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, check that all working good by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it together by hands from top to bottom. Inspect your key fob case for gaps. If it is not tightly closed try to repeat last step.
Video of keyless entry remote opening
How To Change A Car Remote Key Battery on Volvo v70 xc70 s60 s80 cx70 cx90
Still not working? Buy new one