How to Replace the Battery in a 2013 Acura RDX Key Fob
If your car key is no longer working properly, the battery likely needs to be changed. In this article, we outlined how to open your car key fob and change your Acura key battery step by step.
What type battery key fob requireChanging battery in remote key fob require 1xCR2032 battery, flat head screwdriver and phillips head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
- flat head screwdriver
- phillips head screwdriver
- 1xCR2032 battery
Step by step guide
Inside of your remote key fob installed button cell battery. Remove screw on the back of the key fob. Flip the remote key fob over and look for at least 1 screw holding in the plastic.
Delicately try to pry apart your keyless entry remote with flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.
Before assembling fob’s case, verify that all functions works by testing buttons on key fob.
At this point squeeze fob’s back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the key fob.
Key Fob Battery Replacement 2013 Acura RDX Video
2011 - 2015 Acura RDX Key Fob Battery Change - EASY DIY Replacement
Still not working? Buy new one