2013 Acura ZDX Key Fob Battery Replacement Instructions
Keyless entry remote grant access to your Acura. Once the keyless entry remote battery is weak you’ll not to be able lock doors remotely. Yes, it is possible to replace the battery in your key fob with our ultimate guide. All you need is described below.
What kind of battery remote key fob usePrior to disassembly key fob be sure that you have all recommended tools and materials: phillips head screwdriver, flat head screwdriver and 1xCR2032 battery.
- flat head screwdriver
- phillips head screwdriver
- 1xCR2032 battery
Step by step guide
A tiny coin battery installed inside the your keyless entry remote. Remove screw on the back of the remote key fob. Flip the keyless entry remote over and look for at least 1 screw holding in the plastic.
Gently try to disassemble your key with pry tools. Replace CR2032 battery with flat head screwdriver.
Now it's time to install new battery in fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, check remote key fob by pressing buttons. If everything working fine, assemble your fob’s case in reverse order.
The last thing to do is put your cover back on fob. Gently try to assemble the pieces together by hands from top to bottom. If your key fob body tightly closed, we done. If not, repeat the last step. Screw the back of the key fob.
How to change the battery video guide
Acura ZDX Key Fob Battery Replacement (2010 - 2013)