How to Open Your 2013 Audi S4 Key Fob and Change Battery
If your auto remote key fob is not open doors well, the battery more likely must to be changed. In this article, we are going to tell you how to open your remote key fob and change a discharged battery DIY. If you choose to do it at home near S4, use this guide, but first make sure you have everything you need before you start.
What type battery does 2013 Audi S4 keyless entry remote takeBefore going to open key fob be sure that you have all recommended tools and materials: 1 CR2032 battery and flat head screwdriver.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A small coin cell battery installed inside the your remote key fob. Open key before you try to pry apart the remote key fob.
Accurately try to disassemble your key fob with pry tools. Remove one CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you place battery wrong way.
After the new battery installed, check keyless entry remote by pressing buttons. If everything is functioning, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. If your key fob body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2013 Audi S4 Video
How to change SmartKey Key fob Battery on Audi A5 A3 A4 S4 S5 S6 Q5 Keyless entry IYZFBSB802