How to Replace the Battery in a 2013 Chrysler 200 Convertible Key Fob

How to Replace the Battery in a 2013 Chrysler 200 Convertible Key Fob

Key fob allow easy access to your Chrysler. When the remote key fob battery is discharged you’ll lose your keyless entry fob's ability to use remote opportunities. Below, we outlined how to disassembly your car remote key fob and change your Chrysler key battery step by step.

What type battery does 2013 Chrysler 200 Convertible remote key fob required

Don't forget before open key fob be sure that you have all required tools and materials: one CR2032 battery and flat head screwdriver.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's key fob

A tiny button battery installed in the your remote key fob. Remove any internal key before you try to pry apart the keyless entry remote.

Gently try to disassemble your remote key fob with flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.

Get new battery and install it inside keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you place battery wrong way.

Before assembling keyless entry fob's case, make sure that all functions works by pressing buttons on keyless entry remote.

At this point squeeze fob’s back cover together. Line your shell two halves together and assemble it together by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.

Video of keyless entry remote disassembly

How To Replace Chrysler 200 Key Fob Battery 2011 - 2014 FCCID: OHT692427AA

Still not working? Buy new one

Frequently Asked Questions

Key fob of Chrysler 200 Convertible require 1xCR2032 batteries. Most CR2032 batteries are under $4 depending on the brand, size packaging and type you buy. You can take old battery to the store, with you to find a proper replacement.

Key fob in most of cases do not need to be reprogrammed after battery replace. If your key not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can replace battery in your 2013 Chrysler 200 Convertible keyless entry remote yourself. Most hard part is to disassembly fob’s case. It's pretty easy with our guide.

The cost to change the battery in remote key fob is in range from $30 to as high as $500 depending on the brand and the service station.

You should change batteries inside keyless entry remote of Chrysler 200 Convertible at least every three years. The lifetime of battery differ on usage time, operating conditions and quality. Lithium cells normally will last longer.

If your Chrysler signal strength reduced, fob's battery more than 4 years old, key fob buttons not working or need multiple clicks to unlock or lock doors, in most cases battery change in key fob required. Current battery is weak or dead with a high probability, but if it's not fix problem, keyless entry remote change or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OHT692714AA
  2. Models: 2011-2014 Chrysler 200 Convertible