2013 Dodge Durango Key Fob Battery Replacement Instructions

2013 Dodge Durango Key Fob Battery Replacement Instructions

Remote key fob grant access to your Dodge. Once the key fob battery is dead you’ll lose your keyless entry fob's ability to control remote opening function. In this post, you will benefit from knowing how to disassembly your car keyless entry remote and change a weak battery DIY. If you choose to do it at home near Durango, use this guide, but don't forget to check everything you need.

What kind of battery remote key fob use

Don't forget before disassembly key fob make sure that you have all required tools and materials: 1xCR2032 battery, phillips head screwdriver and flat head screwdriver.
  • phillips head screwdriver
  • flat head screwdriver
  • 1xCR2032 battery

Simple steps to change the battery in your car's remote key fob

A button cell battery installed inside the your key fob. Remove any internal key before you try to pry apart the remote key fob. Unscrew the back of the remote key fob. Spin the key fob over and find for at least one fastener holding in the plastic.

Carefully try to pry apart your fob with pry tools. Replace 1xCR2032 battery with flat head screwdriver.

Now it's time to install new battery inside keyless entry fob's case. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you connect battery wrong way.

After the new battery installed, verify remote key fob functionality by pressing buttons. If everything is functioning, assemble your keyless entry fob's shell in reverse order.

The last thing to do is put your cover back on fob. Gently try to assemble the two halves together by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step. Screw the back of the keyless entry remote.

Key Fob Battery Replacement 2013 Dodge Durango Video

How To Replace A 2011 - 2013 Dodge Durango Key Fob Battery FCC ID IYZ-C01C

Still not working? Buy new one

FAQ

Keyless entry remote of Dodge Durango use 1xCR2032 batteries. Price for CR2032 batteries are under $6 build upon the brand, size packaging and type you buy. You can take old battery to the store, to find a proper replacement.

Often, after key fob battery replace, reprogramming not required. Key fob reprogramming procedure often described in user's manual of your vehicle.

Yes, you can change battery in your 2013 Dodge Durango key fob yourself. Most hard part is to open fob’s case. It's pretty easy with our instruction.

The cost to change the battery in key fob is $50-600 depending on the brand and the service pricing.

You should change batteries inside remote key fob of Dodge Durango at least every three years. The term of battery vary on their amount of use, operating conditions and quality. Famous brands cells usually will last longer.

If your car need multiple clicks to unlock or lock doors, signal strength reduced, fob's battery more than 4 years old or key fob buttons not working, in most cases battery replace inside remote key fob needed. Installed battery is dead with a high probability, but if it's not fix problem, key fob replace or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OHT692714AA
  2. Models: 2006-2013 Dodge Durango