How to Open Your 2013 Ford Expedition Key Fob & Change Battery

Key fob allow easy access to your Ford. Once the remote key fob battery is weak you lose your fob’s ability to use remote opening function. In this article, you will benefit from knowing how to disassembly Ford key fob and replace a weak or dead battery DIY. If you choose to do it at home near Expedition, use this guide, but don't forget to check tools and materials required before you start.
What type battery does 2013 Ford Expedition key fob take
Don't forget before disassembly remote key fob be sure that you have all recommended tools and materials: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A small button battery installed in the your keyless entry remote. Move the key out of the way if it is in the key fob.
Delicately try to open your key with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's body. Battery must be installed with the same position as was a previous. Your keyless entry remote will not work if you mistakenly put battery wrong way.
Before assembling fob’s case, check that everything is functioning by pressing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your case pieces together and put it together by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step.
Video of keyless entry remote disassembly
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge