2013 Ford F-350 Key Fob Battery Replacement Guide
Keyless entry remote allow access to your F-350. If the key battery is discharged you lose your fob’s ability to use remote opportunities. Below, we explained how to disassembly your keyless entry remote and change your Ford key battery.
What type battery does 2013 Ford F-350 remote key fob takePrior to open remote key fob check all that you need: flat head screwdriver and 1xCR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your car's key fob
A button cell battery installed inside the your key fob. Remove any internal key before you try to pry apart the remote key fob.
Carefully try to pry apart your keyless entry remote with flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that all working good by pressing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it together by hands from top to bottom. Inspect your key fob case for gaps. If it is not firmly closed try to repeat last step.
Video of keyless entry remote opening
Ford F-350 Super Duty Remote Key Fob Battery Replacement 2011 2012 2013 2014 2015 2016