How to Replace the Battery in a 2013 Jeep Compass Key Fob

If your auto key fob isn't unlock doors properly, the battery more likely must to be replaced. Yes, it is possible to change the battery in your remote key fob with our instruction. Everything you need is outlined in this article.
What is the battery remote key fob use
Before beginning disassembly remote key fob make sure that you have all required tools and materials: flat head screwdriver and CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your car's key fob
Inside of your keyless entry remote installed small button battery. Move the key out of the way if it is in the key fob.
Carefully try to open your remote key fob with pry tools. Remove CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, check remote key fob by pressing buttons. If everything working properly, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key fob body tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
HOW TO REPLACE KEY FOB BATTERY ON JEEP COMPASS
Still not working? Buy new one