2013 Jeep Liberty Key Fob Battery Replacement Instructions
Keyless entry remote allow easy access to your Liberty. If the key battery is dead you lose your keyless entry fob's ability to control remote opportunities. In this article, we explained how to open your key fob and replace your Jeep key battery step by step.
What type battery does 2013 Jeep Liberty keyless entry remote take
Prior to disassembly keyless entry remote be sure that you have all required tools and materials: 1xCR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A tiny button cell battery installed inside the your remote key fob. Move the key out of the way if it is in the remote key fob.
Carefully try to open your fob with flat head screwdriver. Change CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check remote key fob functionality by pressing buttons. If all functions works, assemble your fob’s case in reverse order.
The last thing to do is put your cover back on fob. Carefully try to put the pieces in place by hands from top to bottom. If your fob body tightly closed, we done. If not, repeat the last step.
Video of keyless entry remote disassembly
Jeep key fob battery replacememt
Still not working? Buy new one