How to Open Your 2013 Land Rover LR4 Key Fob and Change Battery
If your car keyless entry remote is no longer working properly, the cell battery most likely needs to be replaced. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All tools, that you need is outlined in this article.
What kind of battery keyless entry remote require
Don't forget before open remote key fob be sure that you have all recommended tools and materials: one CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your key fob installed coin cell battery. Move the key out of the way if it is in the keyless entry remote.
Delicately try to disassemble your key with pry tools. Replace 1 CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.
After the new battery installed, verify keyless entry remote by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your shell two halves together and put it in place by hands from top to bottom. If your key case firmly closed, we done. If not, repeat the last step.
Video of key fob disassembly
How to replace remote keyfob battery on Land Rover Discovery 4 LR4
Still not working? Buy new one