Replace Key Fob Batteries

2013 Mitsubishi Mirage Key Fob Battery Replacement Guide

2013 Mitsubishi Mirage Key Fob Battery Replacement Guide

Key fob grant access to your Mitsubishi. If the remote key fob battery is discharged you’ll not to be able lock car from distance. Yes, it is possible to change the battery in your key fob with our ultimate instruction. All tools, that you need is outlined below.

What type battery does 2013 Mitsubishi Mirage keyless entry remote required

Before starting disassembly keyless entry remote be sure that you have all required tools and materials: flat head screwdriver and one CR1620 battery.
  • 1xCR1620 battery
  • flat head screwdriver

Simple steps to change the battery in your car's key fob

Inside of your remote key fob installed small coin cell battery. Remove any internal key first, and then try to pry apart the remote key fob.

Gently try to disassemble your key fob with pry tools. Replace 1xCR1620 battery with flat head screwdriver.

Get new battery and install it inside keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.

After the new battery installed, verify remote key fob functionality by pressing buttons. If everything is functioning, assemble your keyless entry fob's body in reverse order.

The last thing to do is put your cover back on fob. Delicately try to assemble the two halves in place by hands from top to bottom. Inspect your key fob body for gaps. If it is not tightly closed try to repeat last step.

Video of keyless entry remote opening

Replace Mitsubishi Key Fob Battery

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Mitsubishi Mirage require 1xCR1620 batteries. Most CR1620 batteries are under $4-6 depending on the type, brand and size packaging you buy. You can take old battery to the store, to be sure.

Keyless entry remote in most of cases do not need to be reprogrammed after battery change. If your key not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Replacing your remote key fob battery is easy to do in 2013 Mitsubishi Mirage. Most of car manufacturers think about clients and make a special hole for keyless entry remote disassembly.

The price to change the battery in keyless entry remote can run anywhere $50-600 depending on the brand and the service pricing.

Remote key fob batteries in Mitsubishi Mirage should be replaced once in three or four years, but this will differ based on usage and build quality. If your remote key fob shortened signal strength, you should replace batteries before it stop working and make problems for you.

If your car fob's battery more than 4 years old, need multiple clicks to unlock or lock doors, key fob buttons not working or has low key battery indicator on dashboard, it's probably battery replace inside key fob needed. Installed battery is discharged with a high probability, but if it's not fix, key fob change or repair required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Mitsubishi Models:

Fob Compatibility:

  1. FCC ID: OUCJ166N
  2. Models: 2013-2020 Mitsubishi Mirage