How to Open Your 2013 Mitsubishi Outlander Key Fob & Change Battery

How to Open Your 2013 Mitsubishi Outlander Key Fob & Change Battery

If your Mitsubishi key isn't unlock doors correct, the cell battery more likely must to be changed. In this article, you will benefit from knowing how to open Mitsubishi remote key fob and replace a dead or weak battery yourself. If you decide to do it at home near Outlander, follow our guide, but first make sure you have tools and materials required.

What kind of battery remote key fob require

Before starting disassembly remote key fob be sure that you have all recommended tools and materials: flat head screwdriver and CR2032 batteries.
  • flat head screwdriver
  • 2xCR2032 batteries

Step by step instruction

A small button battery installed in the your remote key fob. Move the key out of the way if it is in the key fob.

Carefully try to disassemble your keyless entry remote with pry tools. Remove two CR2032 batteries with flat head screwdriver.

Change old batteries with fresh one CR2032. Battery must be placed with the same polarity as was an old. Your key fob will not work if you by mistake put battery wrong way.

After the new batteries installed, verify key fob functionality by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.

At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and assemble it in place by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.

Video of remote key fob opening

DIY - Key Fob Battery Mitsubishi Battery Change Outlander

Still not working? Buy new one

FAQ

Keyless entry remote of Mitsubishi Outlander require 2xCR2032 batteries. Most CR2032 batteries are under $5 depending on the size packaging, brand and type you buy. Take your old battery to the store, to find a proper replacement.

Usually, after keyless entry remote battery change, you do not need to reprogram. Keyless entry remote reprogramming procedure often described in user's manual of your vehicle.

Yes, you can change battery in your 2013 Mitsubishi Outlander key yourself. Most hard part is to disassembly fob’s case. It's pretty simple with our guide.

The price to replace the battery in fob is $50-600 depending on the make and the service station.

Keyless entry remote batteries in Mitsubishi Outlander should be changed every three years, also this will differ based on their amount of use and battery quality. If your remote key fob shortened signal strength, you should change batteries before it stop working and make trouble for you.

These symptoms will warning you that it's possible time to change battery in your Mitsubishi Outlander: key fob buttons not working, low key battery indicator on dashboard, signal strength reduced and you didn't change battery more than 4 years.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: WKE-PZ113-04021
  2. Models: 2011-2014 Mitsubishi Outlander