Replace Key Fob Batteries

2013 Mitsubishi Outlander Sport Key Fob Battery Replacement Instructions

2013 Mitsubishi Outlander Sport Key Fob Battery Replacement Instructions

If your Mitsubishi keyless entry remote is not working well, the battery more likely needs to be changed. Below, we explained how to open Mitsubishi key fob and replace a weak or dead battery yourself. If you gonna solve to do it at home near Outlander Sport, follow our guide, but don't forget to check tools and materials required.

What kind of battery key fob require

Replacing battery in keyless entry remote require 1 CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step guide

A small button cell battery installed in the your keyless entry remote. Move the key out of the way if it is in the remote key fob.

Carefully try to pry apart your key fob with flat head screwdriver. Change CR2032 battery with flat head screwdriver.

Now it's time to install new battery inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

Before assembling keyless entry fob's case, check that all functions works by pressing buttons on keyless entry remote.

The last thing to do is put your cover back on fob. Gently try to assemble the two halves in place by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.

How to replace the battery video instruction

DIY - Key Fob Battery Mitsubishi Battery Change Outlander

Still not working? Buy new one

FAQ

Keyless entry remote of Mitsubishi Outlander Sport require 1xCR2032 batteries. Most CR2032 batteries are under $6 depending on the brand, type and size packaging you buy. Take your old battery to the store, to be sure.

Remote key fob in most of cases reprogramming not required after battery replace. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Replacing your remote key fob battery is easy to do in 2013 Mitsubishi Outlander Sport. Most of car manufacturers think of the customers and make a special hole for keyless entry remote open.

The price to replace the battery in remote key fob is from $30 to as high as $500 depending on the brand and the service pricing.

Keyless entry remote batteries in Mitsubishi Outlander Sport should be replaced once in three or four years, also this will vary based on usage and build quality. If your remote key fob shortened signal strength, you should change batteries before it stop open doors and make trouble for you.

These signs will warning you that it's possible time to change battery in your Mitsubishi Outlander Sport: multiple clicks to unlock or lock doors required, key fob buttons not working, signal strength reduced and low key battery indicator on dashboard.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Mitsubishi Models:

Fob Compatibility:

  1. FCC ID: WKE-PZ113-04021
  2. Models: 2011-2014 Mitsubishi Outlander Sport