How to Open Your 2013 Nissan Juke Key Fob and Change Battery
Remote key fob grant access to your car. If the key fob battery is dead or weak you will lose your keyless entry fob's ability to use distance functions. In this post, we demonstrate how to open Nissan remote key fob and change a dead or weak battery DIY. If you decide to do it at home near Juke, use this guide, but don't forget to check all you need before you start.
What type battery does 2013 Nissan Juke key fob takeChanging battery in remote key fob require 1 CR1620 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- flat head screwdriver
- 1xCR1620 battery
Simple steps to change the battery in your Juke's key fob
A tiny coin cell battery installed in the your remote key fob. Move the key out of the way if it is in the keyless entry remote.
Delicately try to open your remote key fob with pry tools. Change 1xCR1620 battery with flat head screwdriver.
Replace old battery with new one CR1620. Battery must be installed with the same polarity as was an old. Your remote key fob will not work if you mistakenly place battery wrong way.
Before assembling fob’s case, make sure that all functions works by testing buttons on key fob.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2013 Nissan Juke Video
How To Change Battery On Your Nissan Juke Key Fob