2013 Toyota Matrix Key Fob Battery Replacement Instructions
If your auto key fob isn't unlock doors properly, the battery most likely needs to be replaced. It's not difficult to replace the battery in your remote key fob, and itβs easier than you think. All you need is outlined below.
What is the battery remote key fob use
Replacing battery in remote key fob require flat head screwdriver and 1xCR2016 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2016 battery
Step by step guide
Inside of your keyless entry remote installed coin battery. Remove any internal key first, and then try to pry apart the key fob.
Gently try to disassemble your keyless entry remote with hands or flat head screwdriver. Replace 1 CR2016 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's shell. Battery must be installed with the same polarity as was an old. Your keyless entry remote will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, make sure that everything working fine by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to assemble the two halves together by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2013 Toyota Matrix Video
How to β Toyota Key Fob Remote Keyless Battery Change/Replace
Still not working? Buy new one