How to Open Your 2013 Toyota Tacoma Key Fob & Change Battery
If your car remote key fob is not unlock doors perfectly, the battery surely needs to be replaced. In this article, we explained how to disassembly Toyota remote key fob and replace a weak or dead battery DIY. If you gonna solve to do it at home near Tacoma, use this guide, but don't forget to check tools and materials required before you start.
What type battery keyless entry remote use
Before you start to open key fob check all that you need: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Tacoma's remote key fob
A small coin cell battery installed in the your remote key fob. Remove any internal key before you try to pry apart the remote key fob.
Gently try to open your key with pry tools. Remove CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you connect battery wrong way.
Before assembling fob’s case, check that all is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and put it together by hands from top to bottom. Inspect your remote key fob case for gaps. If it is not firmly closed try to repeat last step.
Video of key disassembly
Tundra / Tacoma / Rav4 Toyota Key Fob Battery Replacement - DIY
Still not working? Buy new one