2014 Acura ILX Key Fob Battery Replacement Guide
Keyless entry remote grant easy access to your auto. If the keyless entry remote battery is weak or dead you’ll not to be able close car remotely. Below, you’ll benefit from knowing how to open your car remote key fob and change a discharged battery DIY. If you decide to do it at home near ILX, use this guide, but don't forget to check all you need before you start.
What type battery keyless entry remote requireBefore going to open remote key fob make sure that you have all required tools and materials: CR2032 battery, phillips head screwdriver and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
- phillips head screwdriver
Step by step guide
A button battery installed in the your key fob. Remove fasteners on the back of the keyless entry remote. Spin the key fob over and look for at least one fastener holding in the plastic.
Gently try to pry apart your key fob with hands or flat head screwdriver. Change CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.
Before assembling keyless entry fob's case, check that all functions works by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step. Screw the back of the remote key fob.
Key Fob Battery Replacement 2014 Acura ILX Video
How to change Acura Remote Prox Battery | Mr. Locksmith Video
Still not working? Buy new one