2014 Acura ZDX Key Fob Battery Replacement Guide
If your auto keyless entry remote isn't working correct, the battery probably must to be replaced. In this post, we walks you through how to disassembly your keyless entry remote and change your Acura key battery.
What is the battery key fob require
Before going to disassembly keyless entry remote be sure that you have all recommended tools and materials: 1 CR1616 battery, flat head screwdriver and phillips head screwdriver.- phillips head screwdriver
- 1xCR1616 battery
- flat head screwdriver
Step by step guide
A tiny button cell battery installed in the your key fob. Remove screw on the back of the remote key fob. Flip the key fob over and look for at least 1 screw holding in the plastic.
Carefully try to pry apart your remote key fob with pry tools. Change CR1616 battery with flat head screwdriver.
Now it's time to install new battery in fob’s shell. Battery must be installed with the same position as was an old. Your key fob will not work if you by mistake put battery wrong way.
Before assembling fob’s case, check that all working good by pressing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step. Screw the back of the key fob.
Video of key fob opening
Acura ZDX Key Fob Battery Replacement (2010 - 2014)
Still not working? Buy new one