2014 Audi RS5 Key Fob Battery Replacement Instructions

Keyless entry remote grant access to your RS5. Once the keyless entry remote battery is discharged you will lose your keyless entry fob's ability to use remote opening function. Yes, it is possible to replace the battery in your keyless entry remote, and it’s easier than you think. Everything you need is described below.
What kind of battery remote key fob require
Replacing battery in remote key fob require flat head screwdriver and CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A coin battery installed in the your keyless entry remote. Open key first, and then try to pry apart the key fob.
Delicately try to pry apart your key fob with pry tools. Replace 1 CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, check remote key fob functionality by pressing buttons. If everything is functioning, assemble your fob’s case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your key body firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
How to change SmartKey Key fob Battery on Audi A5 A3 A4 S4 S5 S6 Q5 Keyless entry IYZFBSB802
Still not working? Buy new one