2014 Chevrolet Sonic Key Fob Battery Replacement Guide
If your Sonic key fob is not unlock doors perfectly, the cell battery most likely must to be changed. Below, we outlined how to open your car keyless entry remote and replace your Chevrolet key battery step by step.
What kind of battery keyless entry remote useChanging battery in key fob require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A small coin cell battery installed in the your key fob. Open key first, and then try to pry apart the key fob.
Accurately try to pry apart your keyless entry remote with flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, make sure that everything is functioning by testing buttons on key fob.
At this point squeeze fob’s back cover together. Line your case two halves together and put it in place by hands from top to bottom. Check your fob body for gaps. If it is not firmly closed try to repeat last step.
How to change the battery video guide
How to change key fob battery from Chevy Camaro Cruz Equinox Malibu & Sonic 5 button 13500221