How to Replace the Battery in a 2014 Chevrolet Traverse Key Fob
If your Chevrolet key fob is no longer open doors perfectly, the battery likely must to be replaced. Below, we walks you through how to disassembly your remote key fob and replace your Chevrolet key battery step by step.
What kind of battery keyless entry remote useChanging battery in remote key fob require flat head screwdriver and CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your car's key fob
Inside of your key fob installed small button cell battery. Open key first, and then try to pry apart the keyless entry remote.
Gently try to disassemble your keyless entry remote with hands or flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's shell. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you mistakenly place battery wrong way.
Before assembling fob’s case, check that all functions works by testing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. If your key shell firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2014 Chevrolet Traverse Video
GMC / Chevy Key FOB Battery Replacement - Traverse Acadia Yukon Tahoe Surburban - EASY DIY