How to Open Your 2014 Chrysler Sebring Convertible Key Fob & Change Battery

How to Open Your 2014 Chrysler Sebring Convertible Key Fob & Change Battery

If your Sebring Convertible key is no longer open doors properly, the cell battery likely must to be changed. Yes, it is possible to change the battery in your keyless entry remote with our step by step guide. All tools, that you need is described in this article.

What size battery does 2014 Chrysler Sebring Convertible keyless entry remote required

Don't forget before open keyless entry remote make sure that you have all recommended tools and materials: 1xCR2032 battery and flat head screwdriver.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your Sebring Convertible's keyless entry remote

Inside of your key fob installed coin battery. Move the key out of the way if it is in the key fob.

Gently try to pry apart your keyless entry remote with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.

Change old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you put battery wrong way.

Before assembling fob’s case, check that all is functioning by pressing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step.

How to replace the battery video guide

Chrysler Sebring Key Fob Battery Replacement

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Sebring Convertible use 1xCR2032 batteries. Price for CR2032 batteries are under $5 build upon the type, size packaging and brand you buy. Take your old battery to the store, with you to find a proper replacement.

Remote key fob in most of cases do not require to be reprogrammed after battery replace. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Replacing your remote key fob battery is easy to do in 2014 Chrysler Sebring Convertible. Most of car manufacturers think of the clients and make a special hole for remote key fob open.

Car service price for replace the battery in key fob is from 50 to 600 dollars depending on the brand.

Remote key fob batteries in Chrysler Sebring Convertible should be replaced every 4 years, also this will vary based on their amount of use and build quality. If your keyless entry remote decreased signal strength, you should replace batteries before it stop working and make problems for you.

If your auto key fob buttons not working, need multiple clicks to unlock or lock doors, has low key battery indicator on dashboard or signal strength reduced, in most cases battery change in remote key fob required. Currently installed battery is weak with a high probability, but if it's not help, remote key fob change or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OHT692427AA
  2. Models: 2007-2014 Chrysler Sebring Convertible