Replace Key Fob Batteries

How to Open Your 2014 Chrysler Town & Country Key Fob & Change Battery

How to Open Your 2014 Chrysler Town & Country Key Fob & Change Battery

Keyless entry remote grant easy access to your Chrysler. When the remote key fob battery is dead or weak you lose your keyless entry fob's ability to control remote opening function. It's not difficult to change the battery in your keyless entry remote with our instruction. All you need is described in this post.

What is the battery remote key fob use

Prior to disassembly key fob be sure that you have all required tools and materials: flat head screwdriver and one CR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to replace the battery in your car's key fob

A coin cell battery installed in the your remote key fob. Remove any internal key first, and then try to pry apart the key fob.

Delicately try to open your keyless entry remote with flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.

Get new battery and install it in keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you place battery wrong way.

Before assembling fob’s case, check that all functions works by testing buttons on remote key fob.

The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.

Video of keyless entry remote disassembly

How To Replace Chrysler Town & Country Key Fob Battery DIY 2008 2009 2010 2011 2012 2013 2014 2015

Still not working? Buy new one

FAQ

Key fob of Chrysler Town & Country use 1xCR2032 batteries. Price for CR2032 batteries are under $5 depending on the type, brand and size packaging you buy. Take your old battery to the store, with you to find a proper replacement.

Usually, after remote key fob battery change, reprogramming not required. Keyless entry remote reprogramming procedure often described in user's manual of your vehicle.

Changing your keyless entry remote battery is easy to do in 2014 Chrysler Town & Country. Most of car manufacturers think of the clients and make a special hole for key fob disassembly.

The price to replace the battery in remote key fob can run anywhere from $30 to as high as $500 depending on the brand and the service station.

You should replace batteries inside key fob of Chrysler Town & Country at least once in 4 years. The term of battery differ on their amount of use, operating conditions and quality. Lithium cells usually will last longer.

If your Chrysler signal strength reduced, fob's battery more than 4 years old, key fob buttons not working or need multiple clicks to unlock or lock doors, in most cases battery change in key fob required. Installed battery is dead or weak with a high probability, but if it's not fix problem, key replace or repair required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: IYZ-C01C
  2. Models: 2008-2016 Chrysler Town & Country