How to Replace the Battery in a 2014 Dodge Avenger Key Fob
If your auto remote key fob is no longer working correct, the battery more likely must to be replaced. In this post, we demonstrate how to open your car keyless entry remote and replace a dead battery yourself. If you choose to do it at home near Avenger, follow our guide, but don't forget to check all you need before you start.
What type battery remote key fob useReplacing battery in key fob require phillips head screwdriver, one CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
- flat head screwdriver
- 1xCR2032 battery
- phillips head screwdriver
Simple steps to change the battery in your Avenger's key fob
A small coin battery installed in the your key fob. Move the key out of the way if it is in the remote key fob. Remove fasteners on the back of the remote key fob. Flip the keyless entry remote over and look for at least one screw holding in the plastic.
Accurately try to disassemble your key with pry tools. Remove one CR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's case. Battery must be installed with the same polarity as was a previous. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, make sure that everything working fine by testing buttons on key fob.
At this point squeeze fob’s back cover together. Line your shell two halves together and assemble it in place by hands from top to bottom. If your key fob case firmly closed, we done. If not, repeat the last step. Screw the back of the remote key fob.
How to replace the battery video instruction
How To Replace Dodge Avenger Key Fob Battery 2013 2014