How to Open Your 2014 Dodge Durango Key Fob and Change Battery

How to Open Your 2014 Dodge Durango Key Fob and Change Battery

If your Durango key is no longer open doors perfectly, the cell battery most likely must to be replaced. It's not difficult to replace the battery in your keyless entry remote, and it’s easier than you think. All tools, that you need is described in this article.

What is the battery remote key fob require

Don't forget before open remote key fob check all that you need: 1 CR2032 battery, phillips head screwdriver and flat head screwdriver.
  • phillips head screwdriver
  • 1xCR2032 battery
  • flat head screwdriver

Step by step instruction

A small button cell battery installed inside the your key fob. Remove any internal key before you try to pry apart the key fob. Unscrew the back of the remote key fob. Spin the remote key fob over and find for at least one fastener holding in the plastic.

Carefully try to open your fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.

Get new battery and install it inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you put battery wrong way.

Before assembling fob’s case, make sure that everything working good by pressing buttons on keyless entry remote.

The last thing to do is put your cover back on fob. Gently try to assemble the two halves in place by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step. Screw the back of the key fob.

Video of remote key fob opening


Still not working? Buy new one


Remote key fob of Dodge Durango require 1xCR2032 batteries. Most CR2032 batteries are under $5 build upon the type, size packaging and brand you buy. Take your old battery to the store, to be sure.

Key fob in most of cases do not require to be reprogrammed after battery replace. If your keyless entry remote not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Replacing your keyless entry remote battery is simple to do in 2014 Dodge Durango. Most of car manufacturers think of the clients and make a special hole for key fob open.

The cost to change the battery inside keyless entry remote can run anywhere $50-600 depending on the make and the service station.

You should replace batteries inside remote key fob of Dodge Durango at least every three or four years. The lifetime of battery vary on their amount of use, quality and operating conditions. Famous brands cells usually will last longer.

If your Dodge fob's battery more than 4 years old, key fob buttons not working, has low key battery indicator on dashboard or need multiple clicks to unlock or lock doors, in most cases battery change in keyless entry remote needed. Current battery is discharged with a high probability, but if it's not fix, fob replace or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: M3N-40821302
  2. Models: 2014-2020 Dodge Durango