How to Open Your 2014 Jaguar XKR Key Fob & Change Battery
If your XKR key fob is not open doors perfectly, the cell battery likely must to be changed. In this post, you will benefit from knowing how to open your keyless entry remote and change a dead battery DIY. If you decide to do it at home near XKR, follow our instruction, but first make sure you have all you need before you start.
What type battery does 2014 Jaguar XKR remote key fob takePrior to disassembly key fob check all that you need: flat head screwdriver and 1xCR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's key fob
Inside of your keyless entry remote installed tiny coin cell battery. Remove any internal key before you try to pry apart the remote key fob.
Carefully try to pry apart your keyless entry remote with pry tools. Remove CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, verify keyless entry remote by pressing buttons. If everything is functioning, assemble your fob’s case in reverse order.
At this point squeeze fob’s back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your key fob body tightly closed, we done. If not, repeat the last step.
Video of remote key fob disassembly
Jaguar XF Key Battery change HOW TO