Replace Key Fob Batteries

How to Replace the Battery in a 2014 Jeep Wrangler Key Fob

How to Replace the Battery in a 2014 Jeep Wrangler Key Fob

Remote key fob allow access to your car. When the remote key fob battery is dead or weak you will not to be able open car remotely. In this post, we walks you through how to disassembly your key fob and change your Jeep key battery step by step.

What size battery does 2014 Jeep Wrangler remote key fob required

Before going to disassembly key fob check all that you need: flat head screwdriver and 1 CR2032 battery.
  • flat head screwdriver
  • 1xCR2032 battery

Simple steps to replace the battery in your car's keyless entry remote

A coin cell battery installed inside the your remote key fob. Move the key out of the way if it is in the remote key fob.

Gently try to pry apart your remote key fob with flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.

Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

After the new battery installed, verify remote key fob by pressing buttons. If everything is functioning, assemble your keyless entry fob's body in reverse order.

The last thing to do is put your cover back on fob. Carefully try to assemble the two halves together by hands from top to bottom. Check your key shell for gaps. If it is not firmly closed try to repeat last step.

How to replace the battery video instruction

Replacing Key FOB Battery on Jeep Wrangler JK

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Jeep Wrangler use 1xCR2032 batteries. Most CR2032 batteries are under $4 build upon the brand, type and size packaging you buy. Take your old battery to the store, to be sure.

Usually, after remote key fob battery replace, reprogramming not required. Key fob reprogramming procedure often described in user's manual of your vehicle.

Replacing your keyless entry remote battery is simple to do in 2014 Jeep Wrangler. Most of car manufacturers think of the customers and make a special hole for remote key fob open.

Auto repair shop's cost for replace the battery in key fob is from $30 to as high as $500 depending on the make.

You should replace batteries inside remote key fob of Jeep Wrangler at least every 3-4 years. lifespan of battery differ on their amount of use, quality and operating conditions. Famous brands cells usually will last longer.

These signs will warning you that it's possible time to replace battery in your Jeep Wrangler: you didn't change battery more than 4 years, multiple clicks to unlock or lock doors required, low key battery indicator on dashboard and signal strength reduced.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Jeep Models:

Fob Compatibility:

  1. FCC ID: OHT692713AA
  2. Models: 2007-2018 Jeep Wrangler