How to Replace the Battery in a 2014 Toyota Sequoia Key Fob
Keyless entry remote grant easy access to your car. When the key battery is dead or weak you’ll not to be able open car remotely. In this post, we described how to disassembly your car keyless entry remote and replace your Toyota key battery step by step.
What type battery remote key fob requirePrior to open keyless entry remote check all that you need: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A tiny button battery installed inside the your keyless entry remote. Move the key out of the way if it is in the key fob.
Carefully try to pry apart your fob with hands or flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be installed with the same polarity as was a previous. Your remote key fob will not work if you mistakenly put battery wrong way.
When the new battery installed, check key fob by pressing buttons. If everything is functioning, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your remote key fob shell firmly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
Still not working? Buy new one