2014 Volkswagen Tiguan Key Fob Battery Replacement Guide

Remote key fob allow easy access to your auto. Once the key fob battery is dead or weak you lose your keyless entry fob's ability to control remote opportunities. In this article, we explained how to disassembly your key fob and replace your Volkswagen key battery.
What type battery does 2014 Volkswagen Tiguan key fob required
Before starting open keyless entry remote make sure that you have all recommended tools and materials: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your keyless entry remote installed small button battery. Open key before you try to pry apart the key fob.
Gently try to disassemble your fob with flat head screwdriver. Change 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, verify keyless entry remote by pressing buttons. If everything working fine, assemble your keyless entry fob's body in reverse order.
At this point squeeze fob’s back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video instruction
DIY: Volkswagen Key Fob Battery Replacement
Still not working? Buy new one