How to Replace the Battery in a 2015 Buick Enclave Key Fob
If your car key fob is no longer unlock doors perfectly, the cell battery more likely needs to be replaced. In this post, we demonstrate how to disassembly Buick remote key fob and replace a dead battery DIY. If you decide to do it at home near Enclave, use this guide, but don't forget to check tools and materials required.
What size battery does 2015 Buick Enclave keyless entry remote required
Before you start to disassembly keyless entry remote be sure that you have all required tools and materials: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Enclave's keyless entry remote
A tiny coin battery installed inside the your remote key fob. Open the key if it is in the key fob.
Gently try to pry apart your key with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all functions works by pressing buttons on key fob.
At this point squeeze fob’s back cover together. Line your body two halves together and assemble it together by hands from top to bottom. Check your key case for gaps. If it is not firmly closed try to repeat last step.
Key Fob Battery Replacement 2015 Buick Enclave Video
How To Replace A #Buick Enclave Key Fob Battery 2008-2017 FCC ID OUC60270
Still not working? Buy new one