How to Open Your 2015 Chrysler 300 Key Fob and Change Battery
If your auto key fob is no longer open doors properly, the battery likely needs to be replaced. In this case, we are going to tell you how to open your car keyless entry remote and replace a weak battery DIY. If you decide to do it at home near 300, use this guide, but first make sure you have tools and materials required before you start.
What is the battery key fob require
Changing battery in key fob require 1xCR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your car's keyless entry remote
Inside of your key fob installed tiny button cell battery. Remove any internal key first, and then try to pry apart the keyless entry remote.
Accurately try to open your key fob with pry tools. Replace 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify key fob functionality by pressing buttons. If everything is functioning, assemble your keyless entry fob's body in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and put it in place by hands from top to bottom. If your remote key fob body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2015 Chrysler 300 Video
HOW TO REPLACE KEY FOB BATTERY ON CHRYSLER 300 2011 2012 2013 2014 2015 2016 2017 2018 2019
Still not working? Buy new one