How to Open Your 2015 Dodge Dart Key Fob & Change Battery

How to Open Your 2015 Dodge Dart Key Fob & Change Battery

If your Dart keyless entry remote is no longer unlock doors well, the cell battery more likely must to be replaced. It's not complicated to replace the battery in your keyless entry remote, and it’s easier than you think. Everything you need is outlined below.

What type battery does 2015 Dodge Dart keyless entry remote take

Before starting disassembly keyless entry remote check all that you need: phillips head screwdriver, CR2032 battery and flat head screwdriver.
  • flat head screwdriver
  • 1xCR2032 battery
  • phillips head screwdriver

Simple steps to change the battery in your Dart's key fob

A tiny button battery installed in the your remote key fob. Move the key out of the way if it is in the key fob. Unscrew the back of the keyless entry remote. Flip the remote key fob over and find for at least one screw holding in the plastic.

Delicately try to pry apart your key with flat head screwdriver. Replace one CR2032 battery with flat head screwdriver.

Get new battery and install it in keyless entry fob's case. Battery must be placed with the same position as was a previous. Your key will not work if you mistakenly put battery wrong way.

After the new battery installed, verify key fob functionality by pressing buttons. If everything working good, assemble your keyless entry fob's body in reverse order.

At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step. Screw the back of the remote key fob.

How to replace the battery video guide

DODGE DART KEY FOB BATTERY REPLACEMENT REMOVAL. KEY NOT WORKING UNLOCKING DOOR FIX

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Dodge Dart require 1xCR2032 batteries. Price for CR2032 batteries are under $4 depending on the type, size packaging and brand you buy. You can take old battery to the store, with you to find a proper replacement.

Usually, after key battery change, you do not need to reprogram. Keyless entry remote reprogramming procedure often described in user's manual of your vehicle.

Replacing your keyless entry remote battery is simple to do in 2015 Dodge Dart. Most of car manufacturers think about customers and make a special hole for keyless entry remote disassembly.

Dealer service price for replace the battery in key fob is $50-600 depending on the car.

Key fob batteries in Dodge Dart should be changed every 4 years, also this will differ based on usage and build quality. If your keyless entry remote shortened signal strength, you should change batteries before it stop working and make problems for you.

If your Dodge need multiple clicks to unlock or lock doors, fob's battery more than 4 years old, key fob buttons not working or has low key battery indicator on dashboard, in most cases battery replace in key fob required. Currently installed battery is weak or dead with a high probability, but if it's not help, key replace or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: M3N32297100
  2. Models: 2013-2016 DODGE Dart