2015 Kia Sedona Key Fob Battery Replacement Guide

If your auto key fob isn't working correct, the cell battery surely must to be replaced. Below, you’ll benefit from knowing how to disassembly your car remote key fob and change a weak or dead battery DIY. If you choose to do it at home near Sedona, use this guide, but don't forget to check everything you need before you start.
What size battery does 2015 Kia Sedona remote key fob required
Don't forget before disassembly keyless entry remote make sure that you have all recommended tools and materials: 1 CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's remote key fob
Inside of your keyless entry remote installed button battery. Remove any internal key first, and then try to pry apart the key fob.
Carefully try to pry apart your key with pry tools. Change 1xCR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all working good by testing buttons on remote key fob.
The last thing to do is put your cover back on fob. Delicately try to put the pieces in place by hands from top to bottom. Inspect your key fob shell for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video instruction
Kia Proximity Smart Key Battery change HOW TO
Still not working? Buy new one