2015 Nissan Leaf Key Fob Battery Replacement Guide
If your Leaf key fob isn't open doors correct, the battery likely needs to be changed. It's not difficult to replace the battery in your remote key fob by yourself. All you need is outlined in this article.
What type battery key fob require
Don't forget before open remote key fob check all that you need: flat head screwdriver and 1xCR2025 battery.- 1xCR2025 battery
- flat head screwdriver
Step by step guide
A small coin battery installed inside the your remote key fob. Remove any internal key before you try to pry apart the keyless entry remote.
Accurately try to disassemble your remote key fob with pry tools. Replace 1 CR2025 battery with flat head screwdriver.
Replace old battery with fresh one CR2025. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, verify keyless entry remote by pressing buttons. If everything working good, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. Inspect your key shell for gaps. If it is not tightly closed try to repeat last step.
Video of keyless entry remote disassembly
Nissan Leaf remote key fob battery replacement
Still not working? Buy new one