How to Replace the Battery in a 2015 Subaru CrossTrek Key Fob
Remote key fob grant easy access to your auto. If the key fob battery is dead you lose your fob’s ability to control distance functions. Below, we walks you through how to disassembly your remote key fob and change your Subaru key battery.
What is the battery key fob requireDon't forget before disassembly key fob check all that you need: CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your CrossTrek's remote key fob
Inside of your remote key fob installed tiny coin cell battery. Move the key out of the way if it is in the keyless entry remote.
Accurately try to pry apart your keyless entry remote with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Battery must be placed with the same position as was an old. Your remote key fob will not work if you mistakenly put battery wrong way.
Before assembling fob’s case, check that all functions works by testing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. Check your keyless entry remote body for gaps. If it is not tightly closed try to repeat last step.
Video of remote key fob disassembly
How To Replace Subaru Key Fob Battery DIY 2014 2015 2016 2017 2018 2019 2020