How to Replace the Battery in a 2015 Toyota Venza Key Fob

If your Venza key fob isn't unlock doors correct, the battery surely must to be replaced. It's not difficult to replace the battery in your key fob, and it’s easier than you think. Everything you need is outlined in this article.
What is the battery key fob use
Before you start to open keyless entry remote check all that you need: one CR1632 battery and flat head screwdriver.- 1xCR1632 battery
- flat head screwdriver
Step by step guide
A tiny coin battery installed in the your keyless entry remote. Remove any internal key first, and then try to pry apart the keyless entry remote.
Delicately try to open your remote key fob with pry tools. Change CR1632 battery with flat head screwdriver.
Change old battery with fresh one CR1632. Battery must be placed with the same polarity as was an old. Your keyless entry remote will not work if you by mistake place battery wrong way.
Before assembling keyless entry fob's case, check that all is functioning by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your key body firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
How to â—Ź Toyota Key Fob Remote Keyless Battery Change/Replace