How to Open Your 2016 Cadillac CT6 Key Fob and Change Battery
If your auto remote key fob isn't unlock doors properly, the battery most likely must to be changed. Below, you’ll benefit from knowing how to disassembly Cadillac keyless entry remote and change a dead battery DIY. If you decide to do it at home near CT6, use this instruction, but don't forget to check everything you need.
What size battery does 2016 Cadillac CT6 remote key fob required
Before beginning open key fob check all that you need: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A small coin cell battery installed in the your keyless entry remote. Remove any internal key first, and then try to pry apart the key fob.
Delicately try to pry apart your key fob with pry tools. Remove 1 CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.
Before assembling fob’s case, verify that all functions works by pressing buttons on keyless entry remote.
The last thing to do is put your cover back on fob. Carefully try to put the pieces together by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2016 Cadillac CT6 Video
DIY Cadillac - How to change SmartKey Key fob Battery on Cadillac ATC / CTS / XTS
Still not working? Buy new one