How to Replace the Battery in a 2016 Cadillac SRX Key Fob
If your SRX key fob is not unlock doors perfectly, the cell battery more likely must to be changed. It's not difficult to replace the battery in your keyless entry remote, and it’s easier than you think. All you need is outlined in this article.
What is the battery key fob requireReplacing battery in key fob require 1 CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your SRX's keyless entry remote
Inside of your keyless entry remote installed tiny button cell battery. Move the key out of the way if it is in the remote key fob.
Delicately try to pry apart your key fob with pry tools. Remove one CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your fob shell firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2016 Cadillac SRX Video
2014-2017 Cadillac Keyless Remote / Fob Battery Replacement