2016 Chevrolet Colorado Key Fob Battery Replacement Guide
If your car key isn't unlock doors correct, the battery most likely must to be replaced. Yes, it is possible to change the battery in your keyless entry remote DIY. All you need is explained below.
What size battery does 2016 Chevrolet Colorado remote key fob requiredBefore beginning disassembly remote key fob check all that you need: flat head screwdriver and one CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your keyless entry remote installed tiny coin cell battery. Open the key if it is in the key fob.
Delicately try to disassemble your key fob with hands or flat head screwdriver. Change 1 CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, check remote key fob by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
The last thing to do is put your cover back on fob. Accurately try to assemble the two halves together by hands from top to bottom. Inspect your fob shell for gaps. If it is not tightly closed try to repeat last step.
How to replace the battery video instruction
Chevy Silverado / Colorado Key Fob Battery Replacement - DIY