How to Open Your 2016 Ford F-350 Key Fob and Change Battery

Remote key fob grant access to your car. When the key battery is dead you lose your fob’s ability to use remote functions. In this case, you will benefit from knowing how to disassembly your remote key fob and change a dead or weak battery DIY. If you gonna solve to do it at home near F-350, follow our guide, but first make sure you have everything you need before you start.
What kind of battery remote key fob require
Don't forget before open remote key fob be sure that you have all required tools and materials: flat head screwdriver and two CR2025 batteries.- 2xCR2025 batteries
- flat head screwdriver
Step by step guide
A coin battery installed in the your keyless entry remote. Remove any internal key first, and then try to pry apart the remote key fob.
Delicately try to pry apart your fob with flat head screwdriver. Change 2xCR2025 batteries with flat head screwdriver.
Get new batteries and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that everything working fine by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Carefully try to assemble the two halves in place by hands from top to bottom. Inspect your key shell for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video instruction
How To Change Ford Key Fob Battery
Still not working? Buy new one