2016 Honda Fit Key Fob Battery Replacement Guide
Remote key fob grant easy access to your Honda. Once the keyless entry remote battery is dead you’ll lose your fob’s ability to use remote functions. In this case, we are going to tell you how to disassembly Honda key fob and replace a dead battery yourself. If you decide to do it at home near Fit, follow our guide, but don't forget to check all you need.
What kind of battery remote key fob use
Before starting open remote key fob check all that you need: 1 CR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A button battery installed inside the your key fob. Open key before you try to pry apart the key fob.
Delicately try to pry apart your keyless entry remote with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's case. Battery must be installed with the same position as was an old. Your keyless entry remote will not work if you by mistake put battery wrong way.
After the new battery installed, verify remote key fob by pressing buttons. If everything working fine, assemble your fob’s shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step.
How to change the battery video guide
How to replace Honda Smart Key Battery - Honda Fit
Still not working? Buy new one