How to Replace the Battery in a 2016 Lincoln Navigator Key Fob
If your Navigator key is no longer working perfectly, the battery likely needs to be replaced. In this case, you will benefit from knowing how to disassembly Lincoln keyless entry remote and replace a dead battery yourself. If you gonna solve to do it at home near Navigator, use this instruction, but don't forget to check everything you need.
What is the battery remote key fob use
Replacing battery in key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your keyless entry remote installed small coin cell battery. Remove any internal key before you try to pry apart the remote key fob.
Gently try to disassemble your fob with pry tools. Remove one CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.
After the new battery installed, check key fob functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and put it in place by hands from top to bottom. If your key fob body firmly closed, we done. If not, repeat the last step.
Video of key fob disassembly
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge
Still not working? Buy new one