2016 Nissan Murano Key Fob Battery Replacement Guide
If your Nissan keyless entry remote is not open doors correct, the battery most likely needs to be replaced. Yes, it is possible to change the battery in your keyless entry remote, and it’s easier than you think. All tools, that you need is described in this article.
What is the battery remote key fob useDon't forget before open remote key fob check all that you need: one CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your Murano's remote key fob
A button cell battery installed in the your keyless entry remote. Move the key out of the way if it is in the keyless entry remote.
Delicately try to open your fob with hands or flat head screwdriver. Change CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you connect battery wrong way.
After the new battery installed, check key fob functionality by pressing buttons. If everything working fine, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Delicately try to put the two halves in place by hands from top to bottom. Inspect your key fob shell for gaps. If it is not tightly closed try to repeat last step.
How to replace the battery video guide
Nissan Key Fob Battery Change - How To DIY Learning Tutorials