How to Replace the Battery in a 2016 Toyota Tundra Key Fob
If your Tundra key fob isn't working well, the battery most likely needs to be changed. In this post, we explained how to disassembly Toyota keyless entry remote and change a dead or weak battery DIY. If you decide to do it at home near Tundra, use this instruction, but first make sure you have all you need.
What type battery key fob requireReplacing battery in key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Tundra's keyless entry remote
Inside of your keyless entry remote installed coin cell battery. Move the key out of the way if it is in the keyless entry remote.
Delicately try to disassemble your remote key fob with pry tools. Replace 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's body. Battery must be placed with the same position as was a previous. Your key will not work if you mistakenly put battery wrong way.
When the new battery installed, check keyless entry remote functionality by pressing buttons. If everything is functioning, assemble your keyless entry fob's case in reverse order.
The last thing to do is put your cover back on fob. Carefully try to assemble the pieces in place by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2016 Toyota Tundra Video
Tundra / Tacoma / Rav4 Toyota Key Fob Battery Replacement - DIY
Still not working? Buy new one