How to Replace the Battery in a 2017 Chevrolet Colorado Key Fob
If your Colorado key fob is not open doors well, the battery more likely needs to be replaced. In this article, we explained how to disassembly Chevrolet keyless entry remote and change a dead or weak battery yourself. If you choose to do it at home near Colorado, follow our instruction, but don't forget to check tools and materials required.
What is the battery key fob requireChanging battery in keyless entry remote require 1xCR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Colorado's key fob
Inside of your keyless entry remote installed button battery. Open the key if it is in the key fob.
Delicately try to disassemble your fob with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s case. Battery must be installed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, check that all working good by pressing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your fob body tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
Chevy Silverado / Colorado Key Fob Battery Replacement - DIY