How to Replace the Battery in a 2017 Chrysler 300 Key Fob
If your auto keyless entry remote is no longer working perfectly, the cell battery probably must to be replaced. Below, you will benefit from knowing how to disassembly your keyless entry remote and replace a discharged battery yourself. If you decide to do it at home near 300, use this instruction, but first make sure you have everything you need.
What kind of battery remote key fob require
Replacing battery in keyless entry remote require 1xCR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A small button cell battery installed in the your key fob. Remove any internal key first, and then try to pry apart the remote key fob.
Accurately try to open your key fob with pry tools. Change CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s shell. Battery must be installed with the same polarity as was an old. Your key fob will not work if you by mistake place battery wrong way.
Before assembling fob’s case, check that all functions works by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key fob case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2017 Chrysler 300 Video
HOW TO REPLACE KEY FOB BATTERY ON CHRYSLER 300 2011 2012 2013 2014 2015 2016 2017 2018 2019
Still not working? Buy new one