2017 Ford Escape Key Fob Battery Replacement Instructions
Remote key fob grant access to your Ford. When the remote key fob battery is dead you will lose your keyless entry fob's ability to control distance opening function. Below, we explained how to open Ford keyless entry remote and replace a dead battery DIY. If you choose to do it at home near Escape, use this guide, but don't forget to check everything you need before you start.
What type battery does 2017 Ford Escape key fob takeDon't forget before disassembly keyless entry remote check all that you need: one CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Escape's remote key fob
Inside of your key fob installed coin cell battery. Move the key out of the way if it is in the keyless entry remote.
Carefully try to disassemble your key with pry tools. Replace CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Battery must be placed with the same position as was a previous. Your key fob will not work if you by mistake place battery wrong way.
Before assembling fob’s case, verify that all functions works by pressing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2017 Ford Escape Video
2017 Ford Escape key fob battery replacement
Still not working? Buy new one