2017 Ford Expedition Key Fob Battery Replacement Instructions
If your auto keyless entry remote isn't working perfectly, the battery probably must to be replaced. In this article, we demonstrate how to disassembly your remote key fob and replace a discharged battery DIY. If you choose to do it at home near Expedition, follow our instruction, but first make sure you have everything you need.
What is the battery remote key fob use
Prior to open keyless entry remote check all that you need: one CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
Inside of your keyless entry remote installed tiny button battery. Move the key out of the way if it is in the keyless entry remote.
Delicately try to open your keyless entry remote with flat head screwdriver. Change one CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s body. Battery must be installed with the same polarity as was an old. Your remote key fob will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, make sure that all working properly by testing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it together by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2017 Ford Expedition Video
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge
Still not working? Buy new one